Motorcycle helmets are an excellent piece of protection. They are designed to protect your head in case of a crash.
Many motorcycle designs have a visor. Visors protect your face from the wind as well as any debris such as bugs.
You have to regularly clean your visors as they protect your face from the wind and debris.
By the end of this article, we will go through:
- How you can clean your motorcycle helmet visor?
Let’s take a look into it.
How to Clean a Motorcycle Helmet Visor?
As discussed earlier, motorcycle helmets come in different designs. As such, they may or may not have visors.
Usually, half-face helmets don’t have a visor. So, you don’t have to worry a lot about them other than regular work. However, if your helmet has a visor, you have to regularly clean it.
As stated above, visors protect your face from the wind and debris. This can be bugs, sand, rain, etc. If not cleaned timely, your visor can get stained permanently or worse, damaged.
How to Wash a Visor?
Can visors be cleaned like the rest of the helmet?
Visors have a special coating, which prevents fogging. If you attempt to clean them like the rest of the helmet surfaces, you can damage this coating.
We also don’t recommend that you use any harsh chemicals. Also, never dry wipe your visor. You can leave scratches on the visor. You must always use a microfibre cloth soaked in an alcohol-based solution.
When you clean motorcycle accessories, you should use either a special solution for it or simply water. Don’t use oil-based sprays, as they can leave smudges. These smudges can distort your view, especially at night. However, you can use eucalyptus-based sprays.
To clean your visor, you need to:
- Soak your microfibre in some water or other solution.
- Leave your soaked cloth on the visor for 3 to 5 minutes. This will loosen any dead bugs or hard stains left on the visor.
- Remove the cloth and get a new, clean microfiber. You need to run it in water and then put a cleaning solution on it. Be sure that you don’t add a lot of the solution to the cloth.
- You need to scrub the cloth on the visor. Make sure that each part of the visor is scrubbed at least 3 to 4 times. Also, you need to keep the visor in a closed position.
- Then, rinse the soapy cloth and scrub the visor with it. Do it until all the bubbles are gone.
- To clean the inside of the visor, we recommend that you use baby shampoo. Run the cloth under a tap and add a few drops of shampoo to it.
- Scrub the cloth on the visor. We recommend that you do it in a circular motion to cover each portion of the visor.
- Then, rinse the visor. You can do it with water. However, if you have a helmet with a non-removable visor, you can use a towel and stuff it inside the helmet. Make sure that all the bubbles are gone.
- Lastly, you need to let your helmet dry for a few hours.
How Can I keep a Clearer Visor?
You’ll have to regularly wash your visor if it gets dirty. This can be a time-consuming task and also be a bit tiring. You can, however, keep a clearer visor without regular washing.
For this, you can follow these tips:
Use a Lens Cleaner
A lens cleaner is a great method to keep your visor clean after every ride. You can use a small cloth or towel to remove any small debris on your visor.
It is also a good way to avoid any watermarks. Lens cleaners for glasses don’t leave any kinds of marks. There are also motorcycle cleaners available in the market. But if you are on a budget, regular lens cleaners work just fine.
Avoid Touching Your Helmet With Bare Hands
Your fingers can easily smear all the dead bugs or dirt gathered on the visor. This can happen even if you have gloves on. You should always handle your helmet with care.
We recommend that you always lift your helmet from the base. If there is any stain on the helmet, you must pull it over and then clean and remove it. Attempting to clean it during travel is a highly dangerous thing to do.
Keep a Small Cleaning Kit With You
If you are on a longer journey, a small kit can be handy. As discussed above, you must always pull over to remove any stains on the visor.
In this case, a microfibre cloth and a cleaning solution can help you a lot. You can spray the solution on the visor and then clean it with a cloth.
Motorcycle helmets are a must-have safety tool you should have. However, they can be a bit costly. Hence, you need to take good care of them.
Helmets protect both your head and face. They also gather up debris and dust because of this. Some of the most common stains found on a helmet are dead bugs and mud.
The inside lining of your helmet also protects your face from chafing and abrasions. It also absorbs sweat and oil glands. This all can make your helmet disgusting and not appealing.
Luckily, you can easily wash your helmet without the need for some special equipment. You only need to keep some things in mind.
You should keep a microfibre, some shampoo, and a freshwater supply with you. Once you have made sure you have this, you can start:
- First, you must remove all the electronic gadgetry you have installed. This includes all speakers and wiring. You also need to remove the peak of your helmet, if it has one.
- Then, you need to remove the lining of your helmet. You can throw it in the washing machine and wash it that way.
- If your helmet does not have a removable lining, you need to soak it in a tub. Make sure that the water is mixed with soap or any other solution.
- Then, rinse the lining thoroughly and let it dry.
- After that, you need to clean the outside of your helmet. Soak a microfibre cloth in water and place it on the helmet for a few minutes. This will loosen any tough stains.
- You can also remove stains with special wax. Make sure that the visor has been removed before you clean the outside.
- We recommend that you use a Q tip or toothbrush to clean hard-to-reach areas of your helmet.
- You can clean the visor with water. Just simply run it underwater. You can also use a solution or baby shampoo to clean the visor.
- Lastly, you have to reassemble your helmet.
Wrapping Things Up
Motorcycle helmets have visors and a special coating to prevent fogging. This is why you have to be careful of the materials and methods you use.
Luckily, you can remove debris such as bugs and mud by following the guide above.
With this, we reach the end of our article on “How to clean motorcycle helmet visor?”. CLICK HERE for more guides and posts.