Scratches are a common issue when it comes to motorcycle helmet visors. They can easily ruin the entire look of your favorite helmet. However, there is a way to get rid of these scratches.
In today’s post, we’ll discuss how you can easily remove scratches from the visor of your helmet. Moreover, we’ll also go over the tools required for this purpose.
Quick Summary
By the end of this article, we’ll go over the following topics:
- Guide to Remove Scratches.
- Tips to Keep in Mind.
- Frequently Asked Questions.
Without further delay, let’s get you started.
Guide to Remove Scratches from Motorcycle Helmut Face Sheild
Before we get into the step-by-step guide, you should know that there are two types of scratches. Deep scratches and surface scruff, both can be removed but there is a difference.
Since visors are mainly made from plastic, deep scratches will leave a permanent mark. On the other hand, a surface scruff can be easily removed with the help of multiple agents.
Is there no way around to clear a deep scratch?
You can even out a deep scratch but it will leave a fine scratch line behind. It won’t be as bad but noticeable if you look closely.
Besides that, it also depends on the quality of your visor. If the visor is made from sturdy plastic, it’ll be hard to scratch in the first place.
What if my visor is tinted?
Tinted visors are also hard to scratch. However, if you get it scratched, you’ll have to sacrifice the tint in order to remove the scratch. We’ll go over it later in this article. Find more accessories here.
Now, let’s take a look at the tools you’ll need for this process:
- Power buffer polisher
- Sandpaper
- Clean fabric cloth
- High-quality scratch removal cream/paste
- Floride-base toothpaste
- Elbow grease (optional)
Once you gather the aforementioned tools, follow the process given below to remove the scratches.
1. Remove the Visor
The first thing you need to do is remove the visor from your helmet. To do this, bring the visor all the way up.
It’ll uncover a spring clip on both sides. Gently push the clip and it’ll unlock the visor. To remove it, simply pull it up or down and it’ll come off.
What if my helmet doesn’t have clips?
If your helmet doesn’t have clips, check for small buttons in the same location. Press these buttons and it’ll unlock the visor.
2. Clean the Visor
Before you start the process, clean your visor with soapy water. Warm water is mostly preferred for this purpose because it’ll remove stains as well.
You can either use a sponge or a piece of fabric to clean it. Keep at it until the scratch is clear and has no stains around it.
3. Use Sandpaper
The next step is to remove the scratch with the help of sandpaper. For this purpose, you’ll need 2000-grit sandpaper.
Gently rub it over the spots with scratches. You’ll have to do this entire process by hand. However, low-RPM motor tools can also help you with it. Do not use sandpaper anywhere on motorcycle helmets.
Note: Use soapy water when you start the sanding process. Make sure that the visor and sandpaper are properly wet.
Dry sandpaper can severely damage the visor and render it useless.
After you even out the spots, the scratches will almost vanish. You’ll only be able to spot minor streaks.
How do I remove these streak marks?
To remove the streak marks, use 3000-grit sandpaper. Make it wet and gently rub it over the spots. Repeat the process 2-3 times.
4. Apply the Polish
Now it’s time to use the buffer and polish. Apply the polish in small portions on the visor and the buffer.
Note: Always use small amounts of polish. A single drop is usually enough to clear out a scratch. Excessive polish will make the surface oily.
Use the buffer to polish over the scratch. Buffer the surface 2-3 times and wipe it clean with a piece of fabric.
How long should I buffer?
Polish the surface for 1-2 minutes each turn. You can increase the polish time but make sure to do it once or twice only.
After you are done with the polish, thoroughly rub a clean cloth over the visor. This will remove any excess polish on the surface.
If done properly, your visor should be spotless and free of any scratches.
5. Attach the Visor
Put the visor back in its brackets and gently press it down from both sides. You’ll hear a click sound which is the indication of the visor being locked.
To make sure it is properly locked, try it pull it from either side. If there are no unwanted movements, your visor is secure.
Important Tips to Keep in Mind
Following are some things you should be aware of. Let’s take a look at them.
- Always use different cloth pieces to dry and remove excess polish. Wet fabric pieces are inefficient at removing polish from a surface.
- Wear safety gloves at all times. Even though this method doesn’t have any sharp objects, it is good practice to keep your hands covered.
- Always use proper sandpaper. Visors are mainly made from plastic and low-grit sandpaper can damage them beyond repair.
Frequently Asked Questions (FAQs)
We’ve gathered some commonly asked questions from around the web. Let’s check them out.
Can I remove scratches from a tinted visor?
You can easily remove scratches from tinted visors. However, you’ll have to remove the tint for this purpose. This is mainly because polish agents are also good against tint materials.
What type of buffer polisher should I use?
You can use any buffer to polish the surface of your visor. Ryobi buffer polisher is a good option preferred by many experts and professionals.
Can I remove scratches from visors other than motorcycle helmets?
Yes, you can easily remove scratches from all sorts of visors. Just make sure to follow the guide properly and don’t overdo any steps.
What’s the best way to keep my visor safe?
The easiest and most efficient way to keep the visor covered at all times when your helmet is not in use. You can specialized bags for this purpose. Moreover, you can also use a soft fabric to only cover the visor.
Wrapping Things Up…
This brings us to the finish line of our guide on how to remove scratches from motorcycle helmets. We hope this post proves to be informational for you.
Scratches can be easily removed from visors. All you need is suitable sandpaper and some polish cream to clear the surface. Moreover, this completely eliminates the requirement of buying a new visor.
Do let us know what sort of scratch removal paste you prefer. CLICK HERE to visit our website.
